WEISS GAMBIT EQ1-MKII Provozní pokyny stáhnout pdf (Strana 9)

OPERATING INSTRUCTIONS FOR GAMBIT EQUALIZER EQ1-LP OPERATION

Daniel Weiss Engineering Ltd., Florastr. 42, CH-8610 Uster Page 9 of 28

 +41 1 940 20 06  +41 1 940 22 14  http://www.weiss.ch  [email protected]

Adjusting Band Parameters

To adjust boost, Q/ slope or frequency simply

turn the corresponding knob (see Table 1).

To adjust the mode, activate the band. Press a

key (Table 2) to change the mode value. The

active mode is highlighted and the adjacent soft-

key is lit.

If the band bypass is on (highlighted), its filter

settings (type and parameters) are saved but have

no effect on the audio signal. Turning bypass off

will restore the previous band settings.

Bypassing all bands is sonically equivalent to

using the overall bypass (refer to EQ Bypass)

if the gain is set to 0.0dB.

Controls

See Graph 1: Front Panel Elements,



CH1 & CH2

These two keys patch the band controls to the

according channels. The band controls can either

be separate for each channel or ganged together.

The key is lit for the active channel.

To copy CH1 settings to CH2 or vice versa, press

the “copy” key and select an option (Graph 6).

Ganged

When this key is lit, the band controls act for both

channels simultaneously. Switching channels while

the “ganged” key is lit will activate CH1 and CH2

settings alternately for both channels.

If ganged is off, the controls will affect the active

channel only.

“boost” “Q/ slope” “frequency”

Peaking-Filter

set boost set Q set centre frequency

Shelve-Filter

set boost set shape set 3dB frequency

Cut-Filter

- set slope set -3dB frequency

Table 1

Key A Key B Key C Key D

Mode

toggle lo- / hi-shelve

Peaking toggle lo- / hi-cut bypass

Table 2

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 27 28

Komentáře k této Příručce

Žádné komentáře

WEISS GAMBIT EQ1-MKII Provozní pokyny Strana 9

Komentáře k této Příručce

Související produkty a manuály pro Audio ekvalizéry WEISS GAMBIT EQ1-MKII